How to install Bluestacks with bitdefender 2015

How to install Bluestacks with Bitdefender Total security 2015

Download Bluestacks

1. Download and install Uni extractor

2. Extract bluestacks...msi

3. Now open extracted folder

4. Now download and install instedIt

5. Now open Bluestacks...msi with instedIt

6. From left side select InstallExecuteSequence

7. From right side select CheckAV

8. Now change the value to inbetween 50 to 100

9. Now save the package

10. before installing we need to change the package name to Original name

11. Now Your Bitdefender is not blocking your installation

12. Now installation successfully completed

13. Now open Blustacks


Note: it's not showing after initialization screen for me...

in my case..in my laptop Nvidia graphics card is there..May problem with that


For video tutorial

Any suggestions would be appreciable .......

How to Fix Corrupt PST files in MS Outlook

If you are the victim of corrupt PST files or Outlook popping errors or its running excessively slow, then you must repair the Outlook PST files before its too late. Today most likely people use Microsoft Outlook often to send and receive mails. Due to its Flagship product from Microsoft Office, it makes the primary tool for email. It’s not just an application for managing your email but also your contact, your calendar, your tasks and notes, which are very important and cannot think of losing it. To repair or recover mails from such corrupted PST files, there are many software available, but you may have to chunk out some money from your pocket. However, before trying any paid tool to repair your PST file, try Microsoft in-built PST Scan and Repair tool called SCANPST.

What is Outlook PST Files?

Microsoft Outlook use PST files to store Outlook data, including your mails, email folder, tasks and notes, contacts and other personal data. PST Files are also known as Personal Folders and Outlook Data File.

How to Repair or Fix Corrupt PST Files

Microsoft provides the PST Repair Tool for fixing most of the problem with damaged personal folder i.e. PST Files. In order to repair your corrupted or damaged PST files, we would need to open Scanpst.exe utility that’s included by default with Outlook. This tool can also be used for email recovery while fixing the corrupt PST Files. However, accessing this tool is a bit troublesome since there is no easy shortcut to it, so you’ll need to find in Outlook Folder.

For Outlook 2010, Open the below path in explorer to find Scanpst.exe utility tool.

C:\Program Files\Microsoft Office\Office14

For Outlook 2007, Open the below path in explorer to find Scanpst.exe utility tool.

C:\Program Files\Microsoft Office\Office12

For Outlook 2003 or earlier, Open the below path in explorer to find Scanpst.exe utility tool.

C:\Program Files\Common Files\System\Mapi\1033

C:\Program Files\Common Files\System\MSMAPI\1033

Step 1: Open the Scanpst.exe utility, Click on Browse and select your corrupted or damaged PST File. If you are not sure about the location of your PST Files then check below for default location of PST Files.

Windows XP

• Outlook 2007 and previous
  C:\Documents and Settings\%username%\Local Settings\Application Data\Microsoft\Outlook\
• Outlook 2010
  C:\Documents and Settings\%username%\My Documents\Outlook Files\

Windows Vista and Windows 7

• Outlook 2007 and previous
  C:\Users\%username%\AppData\Local\Microsoft\Outlook\
• Outlook 2010
  C:\Users\%username%\Documents\Outlook Files\

Step 2: Click on Start to scan the PST File

Step 3: Once Scan is completed. It will display the scanning report. If there is any issue, then it may ask you to click on the repair button in order to repair the PST file. You can also click on Details… button for more information about the error in PST File.

If everything goes well, you will see “Repair Complete” dialog box. Click on OK and Open Outlook. You might now be able to open your outlook with your exciting PST File. In case it fails to Repair then try again to repair the Corrupt PST File. If it again fails, you might want to try some other popular tools, which are available at very low price

How To Turn On your Computer Using Keyboard Or Mouse

1. Power on your system and Press F2 or Delete to access BIOS setup screen.

2. Select Power Management or Integrated Peripherals and look out for the options “Power on By Keyboard” or “Power on by Mouse”

3. If you want to Power your system using keyboard then select “Power on By Keyboard”. You will see below two options to enable,

• Password: If you want to Power On your system using the keyboard, then select “Power on By Keyboard”. You will see below two options to enable.
• Keyboard 98: This can be selected for older models of keyboard.

If you want the system to Power On using the mouse, then select “Power on by Mouse” and select Double click option.

Once the setting is configured, press F10 to save the BIOS settings and Exit. In order to test, shut down your computer and press the assigned key to Power On / Turn On your computer using keyboard and mouse. System would generally be Power On without pressing the power button on CPU/tower.

How to Fake processor name

How to Fake processor name

Step 1: Go to Start –> Run –> Type "Regedit" and Press Enter.

Step 2: In Regedit, Navigate to HKEY_LOCAL_MACHINE –> HARDWARE –> DESCRIPTION –> System –> Central Processor –> 0.

Step 3: Now, On right Pane (Right Side), Find "ProcessorNameString" in name column.

Step 4: Now, Double-Click on "ProcessorNameString" and modify its value data. Change the Value Data as you wish. After Changing the value Date, Press Ok.This detail will be shown on system properties.

Note: This Changes are temporary. If you restart your System or PC, it will change to default which you had earlier.


For Video tutorial

How to extend the life of your laptop battery

Batteries don't last forever. Like everything except diamonds and viral tweets, they eventually wear out. But with proper care, a laptop battery can still carry a sufficient charge until you're ready to move on to a better laptop.

But it's a trade-off. Taking the best care of your laptop battery just may be more of a hassle than it's worth.

So let me start with a less effective, but more practical approach:

When you're at home, running the laptop on AC power, and you believe that it will stay plugged in for a week or more, shut down the PC and remove the battery.

Then, when you need the battery, plug it back in. If it's been more than two months since you last used the battery, check it and charge it before taking it on the road.

Of course, you should never remove or insert a laptop battery while the laptop is running. Always shut it down first.

That's the practical approach. Here's the extreme care method:

For the absolute best results, never charge it past 80 percent or let it drop below 20 percent. When you're working on AC power, keep an eye on the batteries charging.  When it hits or passes 80 percent, shut down your computer, remove the battery, then reboot. When it's time to take the laptop on the road, shut it down again and reinsert the battery.

And when you're using the laptop on battery power, shut it down before the battery drops below 20 percent, and don't start it up again until you have AC power.

As I said, probably more of a hassle than it's worth.

How to Enable Copy paste in CMD – Windows

By Default Windows do not allow users to Copy text and Paste it in Command prompt Or Copy text from Command prompt and paste it elsewhere. But there is an option in CMD itself to enable Copy & Paste Text in Windows Command Prompt.

Today in this tutorial we will learn how to “Enable Copying and Pasting Texts in Windows Command prompt”. One of the main advantage of this will be that you can copy any command that you find on the internet or from any word/excel file and paste it directly in CMD and execute that command just like that.

How to Enable Copy Paste in CMD

Step 1: Open CMD, Just type CMD in search or Press Win + X key to select Command Prompt.

Step 2: Right Click on the Title of the CMD window and Select Properties just like its shown in the below Picture

 Step 3: You will see a Pop up Window coming up, Now on the Right hand side, Under Edit Options, Just Check Quick Edit Mode and click OK

Step 4: Everything is Done, Now just Copy any Text from Here or Anywhere else Using CTRL + C keys and just Right click using your mouse on CMD. You will see that the text is been pasted automatically in CMD. Please Understand that Using CTRL + C to Copy text is Important.

Likewise if you wish to Copy Text from CMD to paste elsewhere then Just Select the Text in CMD and Again just Right Click with the mouse. Your Text is Copied and ready to Paste it in any Document you want.

This Doesn’t Limit you to just Text you can even copy File or Folder path and paste it in CMD. Everything that you have to type manually can be copied from somewhere and pasted directly to CMD with this small Tweak

So this was just a small Tip I wanted to Share with my Readers so that you don’t have to Type any long Command in CMD which if typed incorrectly can cause errors. I hope this will help some of you.

How to Activate the Hidden Administrator account

Today we going to learn how to show the hidden administrator account in Windows. Actually this is the main admin account when we install new Window’s. We can only operate this admin account from SAFE MODE. But today I’m going to tell you how to show this hidden admin account on to your log in screen.

 We have to method to show…

Through User Account Control

1. Go to your Start menu and right-click on the My Computer icon.

2. Choosing Manage from the list will prompt a User Account Control (UAC).

3. When you are done, the Computer Management console will appear. Expand the Local Users and Groups option with the use of the arrow next to it and choose Users folder.

4. You can now select the Administrator Account and go to the Actions panel to open More Actions.

5. Choose Properties to open the Administrator Properties dialog box and uncheck the option labeled Account is Disabled.

6. When done, click OK to confirm changes.

7. The Administrator account should now be present on your log in screen.

With Command Prompt

1. Go to your Start menu and in Accessories list, open Command Prompt by right-clicking on its icon and choosing Run as Administrator

2. When the Command Prompt window appears, enter the command net user administrator /active: yes

3. When done, log out from your current account. Just add a No instead of yes to deactivate the account.

4. The Administrator account should now be present on your log in screen